BDR-924 Series Ordering Information
| Cross Reference Table | |
| Klipet Part# | Cross to |
| BDR-924-B | BDR-999-B-24 |
| BDR-924-G | BDR-999-G-24 |
| BDR-924-R | BDR-999-R-24 |
| PW2-24 | PW2-24 |
 | BDR-924-B | 2.3" Numeral Multifunction Meter, 10.5 - 30 VAC/DC Power, 3 1⁄2 Digit BLUE LED | $225.00 | Order Here |
 | BDR-924-G | 2.3" Numeral Multifunction Meter, 10.5 - 30 VAC/DC Power, 3 1⁄2 Digit GREEN LED | $225.00 | Order Here |
 | BDR-924-R | 2.3" Numeral Multifunction Meter, 10.5 - 30 VAC/DC Power, 3 1⁄2 Digit RED LED | $225.00 | Order Here |
 | PW2-24 | DC Power Supply, 120 AC Input, 24 VDC @ 100mA Output | $12.50 | Order Here |
Description
The BDR-924 Series is a large multifunction 3 1/2 digit LED display featuring 2.3" numbers. Available in blue, green or red with multiple power and input ranges as well as versatile wall, bench, ceiling and panel mounting configurations.
Features
◊ Replaces separate display and meter modules
◊ Optional red, green or blue LED◊ Bezel mount or 180º gimbal mounting in multiple planes
◊ Resistant to RF and EMI◊ Rugged metal case
◊ 2.3" LED display visible from across the room◊ Multifunction loop, set voltage, adjustable voltage inputs, all included
◊ Isolated AC/DC supply works in many control applicationsSpecifications
Display: |
Digits: | 3 ½ digits (±1999 counts) |
| Type: | 2.3" (58.4mm) - 7 segment LED | |
| Optional red, green or blue digits | ||
| Inputs: |
Set Voltage Ranges: |
±200mV, ± 2V, ±20VDC |
| Configuration: |
bipolar differential | |
| Protection: |
±350Vdc, (±100Vdc on 200mV Range) | |
| Impedance: |
>1MΩ, (>10MΩ on 200mV Range) | |
| Adj. Voltage Ranges: |
5V, 10VDC |
|
| Offset Range: |
-1999 to +1999 | |
| Gain Range: |
1 to 1000 | |
| 4-20mA Loop Ranges: |
4 to 20mA DC |
|
| Configuration: |
bipolar differential | |
| Protection: |
±30mA | |
| Loop Impedance: |
300Ω nominal | |
| Performance: |
Accuracy: |
±0.1% fs + 1 count) |
| Conversion Rate: |
3 per second | |
| Normal Mode Rejection: |
>30 db @ 60 Hz | |
| Common Mode Rej.: |
>86 dB | |
| Zero Adjustment: |
automatic on set voltage ranges | |
| Warmup: |
10 minutes typical | |
| Temperature Coeff.: |
± 100 ppm per °C typical | |
| Environment: |
Operating Range: |
-10 to 50 °C |
| Storage Range: |
-40 to 75 °C | |
| Power Supply: |
10.5 to 30 VAC/DC @ 6VA | |
| Mounting: | 180° gimbal mounting with 30° stops, or bezel mount | |
| Connection: | screw terminals | |