LPI-1C-K Series Ordering Information
| Cross Reference Table | |
| Klipet Part# | Cross to |
| LPI-1C-K | LPI-1C |
| LPI-1CA-K | LPI-1CA |
| LPI-1CG-K | LPI-1CG |
| LPI-1CGP-K | |
| LPI-1CR-K | LPI-1CR |
| PW2-24 | PW2-24 |
 | LPI-1C-K | NO BACKLIGHT LCD, RANGE: 4-20mA, MOUNTING: SNAP IN | $45.00 | Order Here |
 | LPI-1CA-K | NEGATIVE AMBER LCD, RANGE: 4-20mA, MOUNTING: SNAP IN | $51.00 | Order Here |
 | LPI-1CG-K | NEGATIVE GREEN LCD, RANGE: 4-20mA, MOUNTING: SNAP IN | $51.00 | Order Here |
 | LPI-1CGP-K | POSITIVE GREEN LCD, RANGE: 4-20mA, MOUNTING: SNAP IN | $51.00 | Order Here |
 | LPI-1CR-K | NEGATIVE RED LCD, RANGE: 4-20mA, MOUNTING: SNAP IN | $51.00 | Order Here |
 | PW2-24 | DC Power Supply, 120 AC Input, 24 VDC @ 100mA Output | $12.50 | Order Here |
Description
A series of high performance snap-in LCD digital panel meters with several available options. The LPI-1C-K is a 3 1/2 digit LCD with Loop Powered Interface Board, available in amber, red, green or positive green backlight or non-back lit.
Features
◊ Low-cost, high-performance replacement for many OEM DPMs
◊ Optional Red, Green or Amber backlighting
◊ Snap-in bezel mount eliminates mounting hardware
◊ Resistant to RF and EMI
◊ 3 1/2 digits with high-contrast LCD
◊ 4- 20 mA loop powered input
◊ User selectable, displayed engineering units
Specifications
Display: |
Digits: | 3 ½ digits (±1999 counts) |
| Type: | 0.45" (11.4 mm) 7 segment LCD | |
| Backlighting: | Optional: | Red Negative
(red numbers/black background) |
| Polarity: | automatic, “-” displayed | |
| Annuciators: | °F, °C, PSI, %, user selectable | |
| Decimal Points: | 3 position, user selectable | |
| Overrange: | three lower order digits blank for inputs >1999 & < --1999 | |
| Inputs: | Ranges: | 4-20mA DC |
| Configuration: | bipolar differential | |
| Impedance: | 300Ω nominal | |
| Performance: | Accuracy: | ± (0.1% fs + 2 count) |
| Conversion Rate: | 3 per second | |
| Normal Mode Rejection: | >30 db @ 60 Hz | |
| Common Mode Range: | ±1V DC max | |
| Common Mode Rej.: | >86 dB | |
| Adjustments: | span (gain) and zero (offset) | |
| Warmup: | 10 minutes typical | |
| Temperature Coeff.: | ± 100 ppm per °C typical | |
| Environment: | Operating Range: | 0 to 50 °C |
| Storage Range: | -20 to 70 °C | |
| Power Supply: | powered by milliamp control loop | |
| Optional Backlight: | 24V DC at 35 mA typical | |
| Mounting: | snap-in bezel mount | |
| Connection: | 2 screw terminal (4 with backlight) | |
| *Negative backlighting is lighted numerals | ||
| Positive backlighting is lighted background | ||